2008 Goss Community SSC Press

2008 Goss Community Press SSC 997 and 1012

Exceptional opportunity to own a very late model automated Press. 578 cut-off (22-3/4”) circa 2008 Goss Community rated at 35,000 per hour. Remote Ink, Motorized Register, Spiral Brush, One owner!

Goss Community SSC Press SSC 997 and 1012 comprising:

  • Four (4)- 4 High towers designed for register of 4-colour process printing
  • Four (4)- MegTec automatic zero speed splicer’s (50”), 90 degrees
  • Two (2)- SSC Folders, one with upper former
  • Two (2)- Parker SSD590 DC drives with motors
  • Cut-Off (Nominal) – 578 mm
  • Maximum Web Width – 889 mm
  • Minimum Web Width – 584 mm
  • Maximum Running Speed – 35,000 copies per hour

Four (4) Goss Community SSC 4 High tower arrangements, consisting of:

  • Four perfecting units stacked on top of each other.
  • One web in each 4Hi tower printing 4+4 colour
  • Swing down ink fountains with twenty (20) motorized Goss remote controlled ink keys, one-piece ink fountain blades.
  • Each printing couple has an eight (8) roll ink train consisting of one (1) direct gear driven steel ink fountain roller, (1) knurled micrometric roller, two (2) ink oscillator drums with Rilsan covering, two (2) transfer rollers with rubber covering, and two (2) form rollers with rubber covering.
  • Spiral brush style dampening system, complete with one (1) variable speed water pan roller with press speed tracking, one (1) fixed speed brush roller, one (1) oscillating chromed transfer roller, and one (1) rubber form roller.
  • Each plate cylinder is solid stainless steel and with a slot gap plate lockup system.
    • Single register pin
    • Standard plate cylinder undercut of.012″ (.305 mm) for.012″ (.305 mm) plates.
  • Each blanket cylinder is solid stainless steel with bearers and uses a T-bar blanket lock up.
  • Central grease lube on operating side for improved lubrication and ease of maintenance
  • Pneumatic control of the ink, water and impressions sequentially timed to the
    press speed
  • Goss motorized registration system controlled from the screen mounted on the console
  • Double hinged doors on operating side
  • Complete set of press unit safety guards with interlocks
  • Four (4) Megtec Zero Speed SE fully automatic splicers, featuring:
  • Maximum reel diameter 1270mm (50”)
  • Maximum splicing speed 6.6 m/s
  • Free standing design (No mechanical connection)
  • Electric hoist with safety limits (No lifting required)
  • Motorized adjustable sidelay + – 20mm
  • Low riding festoon minimizes web span
  • Dancing roller holds web tension constant during splicing
  • Automatic or Manual Splicing Sequence
  • Roll stand holds two full reels of paper
  • Two 75mm (3”) air shafts and one spare
  • A new reel can be loaded immediately after a splice
  • Remote web tension & reel sidelay
  • Four (4) shaft driven Infeeds
  • Four (4) Megtec one web angle bars with blowers
  • Two (2) Goss SSC Folders for BROADSHEET and TABLOID products with:
  • Two pair of driven nipping rollers, manually adjustable on the run
  • One -around cutting cylinder & two-around folding cylinder
  • Manual lap adjustment at standstill – Even to 7mm, pin side long
  • Manual pin cam adjustment at standstill
  • Folder Fly delivery:
    • Reverse fly delivery
    • Consistent copy spacing
    • Folded edge leading
    • Delivery conveyor
  • Oil lubrication for drive side
  • Heavy duty drive gears
  • Slip gear arrangement to protect folder
  • Rugged frame design with rigid cross members
  • Box design frames for drive side
  • Folder safety guards with interlock
  • RTF trolleys with tabloid slitter–pneumatic control
  • Former chrome plated and drilled for
  • Blower for former
  • One (1) UPPER FORMER
    • Maximum capacity 4 webs broadsheet
    • Installed on folder F2
  • Two (2) QUARTER FOLDERS
    • Cycloidal folding device with rotary brush
    • Tape delivery and airfoil for product control
  • One (1) DOUBLE PARAREL FOLDER
  • Auxiliary Equipment to include:
  • One (1) Press drive system comprising:
    • 2 x 132 kW DC drive motors
    • 2 X Parker SSD 590 controllers
  • Two (2) Master Press Control desks
  • Two (2) Auxiliary Control desks
  • Remote tension and sidelay control at consoles
  • Motorized register control at the consoles
  • Two (2) Omnicom Remote Ink Consoles with:
    • High resolution,
    • Full sized bar graph display with digital position readout
    • CIP3 Interface
  • Four (4) Electronic non-contact web break detectors
  • Four (4) Motorized full page compensators, controlled from console.
  • Four (4) Web severers
  • Four (4) Fan out control rollers
  • Four (4) Manual web up devices (Megtec splicers to tower only)
  • Color: Goss Community Blue (RAL5015)

Download the PDF | Email the Owner