ONE OWNER of this 2007 Goss Magnum Press

Six (6) Goss Magnum Towers – MSC 9005/6 new in 2007

• 22” cut-off, 35” wide, 35,000 iph
• Rated at 35,000 cph
• 22” cut-off X 35” wide
• Slot style plate cylinders
• .008” plates and no packing
• Reel rod blankets with bearers
• Brush dampening
• Remote inking
• Motorized register

One (1) Goss N40 Folder – MSC 9014 new in 2015

22” cut-off, 35” wide, 35,000 iph, half fold, quarter fold, steep angle air former, triple knife cross perforator, double parallel, two sets of nips, reverse fly half fold and pneumatic trolleys

• 1 N45 Quarter folder upgrade for N40 (QF for up to 8 webs)
• 1 N40 Jam detection for QF
• 1 Double parallel fold (fly delivery) for N40
• 1 Double under folder lead for N40 folder
• 1 Perforator at Nip, quarter fold for N40
• 1 Perforator at RTF for N40
• 1 Cross Perforator, 3 knives for N40
• 2 Continuous platform operator side only for N40
• 1 Level 1b existing console & drive cabinet updates
• 1 Press interface parts, mechanical as needed
• 1 VPN for Phase 1 of existing press relocation
• 1 Air Blower for former (RELEC)
• 1 Console, Omnicolor only – Size 4 (75.5 inch) includes touch screen, overhead light, bar graph, bezel paper stop, sig panel
• 1 Level 1b desk (1850mm) with LCD and over head lamp
• 6 Cable from tower to console, 1 per footprint

One (1) Goss N40 Folder – MSC 9005 new in 2007

• 22” cut-off, 35” wide, 35,000 iph, half fold, quarter fold, steep angle air former, cross perforator, upper former, two sets of nips, reverse fly half fold and pneumatic trolleys
• 1 N40 Jam detection for QF
• 1 Double under folder lead for N40 folder
• 1 Cross Perforator, 1 knife
• 2 Continuous platform perator side only
• 1 Console, Omnicolor
• 1 Air Blower for former (RELEC)
• 1 Level 1b desk

Six (6) Megtec zero speed splicers

• Arranged as tandem sets
• 1300 feet per minute
• 50” diameter

Ultra Sonic web detection

Omnicon press controls

Three (3) SSD drives X 177 HP