DGM 430 Press, 22 cut-off (560 mm), located in Centralia, WA and available immediately. Facility is one hour from SEA airport. All equipment originally manufactured in the USA. Described as:

One (1) DGM 1030 Folder (1998) each with upper former:

  • Maximum speed: 30,000 PPH
  • Minimum 1/2 web of 30lb. newsprint & Maximum 10 webs of 30lb newsprint.
  • Delivery is fold first for half fold and quarter fold.
  • Motorized delivery system with press speed tracking.
  • Web size: 1/2 and 1/4 fold 20” (508mm) full web or 10” (254mm) ribbon;
  • 1/2 and 1/4 fold a maximum 35”; full web or 17.5” ribbon.
  • Lap Adjustment: Stop and move design Max. +/- .375” (pin long or pin short)
  • Former section: 56 degree former, drilled for air with blower.
  • Pneumatic trolleys and driven tabloid slitter.
  • Two sets of standard diameter nips. Third cylinder sized nip.
  • Quarter folder: pecking type chopper with tape transport and oil bath gears.

Two (2) 100 HP Digital Press Drive Systems – One Press console

Three (3) Jardis HS 35000 zero speed splicers with air shafts and angle bars

  • One tandem set and one single

One (1) Connecting parts

One (1) Professional removal

One (1) Load trucks or containers