Complete DGM 430 Press, 22″ cut-off (560mm), located in Centralia, WA and available immediately.  Facility is one hour from SEA airport.  All equipment originally manufactured in the USA.  Described as:

• Two (2) DGM 1030 Folders (1998 and 2003) each with upper former:
  • Maximum speed: 30,000 PPH
  • Minimum 1/2 web of 30lb. newsprint.
  • Maximum 10 webs of 30lb newsprint.
  • Delivery is fold first for half fold and quarter fold.
  • Motorized delivery system with press speed tracking.
  • Web size: 1/2 and 1/4 fold 20” (508mm) full web or 10” (254mm) ribbon;
  • 1/2 and 1/4 fold a maximum 35”; full web or 17.5” ribbon.
  • Lap Adjustment: Stop and move design Max. +/- .375” (pin long or pin short)
  • Former section: 56 degree former, drilled for air with blower.
  • Pneumatic trolleys and driven tabloid slitter.
  • Two sets of standard diameter nips. Third cylinder sized nip.
  • Quarter folder: pecking type chopper with tape transport and oil bath gears.
• Two (2) 100 HP Digital Press Drive Systems – One Press console
• One (1) 150 HP Digital Press Drive System – One Press console
• Three (3) DGM 430 Four Highs
  • One tower has QTI motorized register and Perretta remote inking console
• Two (2) DGM 430 Mono Units with RTS 90 Pneumatic Brakes
• Two (2) DGM 430 Stacked (upper) Units
  • Sock Dampening
  • Operator side Running Circ Register
  • Pneumatic throw off functions
  • Drop down lever ink fountains
  • Narrow SLOT gap plate cylinders
  • Narrow reel rod blanket cylinders
  • Central grease lubrication headers
  • Full page motorized compensators
  • Ultra sonic web detection
  • Ink levelers
• Six (6) Jardis HS 35000 zero speed splicers with air shafts and angle bars
• One (1) Water system
• One (1) Plate bender
• One (1) Connecting parts
• One (1) Manuals
• One (1) Professional removal
• One (1) Load trucks or containers